AAI ORIGINAL English Verison N1201SA N1201SA+ 34.375MHz-2.7GHz UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester
285
Direct purchase from the factory 
Zagarantovana sigurna naplata
Besplatan dar
Pravila dostave
Pravila povrataBesplatan dar
Dobrodošli u Roymall, vašu profesionalnu web stranicu za kupovinu vrhunskih darova iz robnih kuća. Visoko cijenimo i cijenimo vašu podršku i želimo vam zahvaliti dodajući dodatnu dozu uzbuđenja vašim kupovinama. Kada kupujete kod nas, ne samo da ćete uživati u visokokvalitetnim proizvodima koji poboljšavaju vaš životni stil, već ćete također dobiti ekskluzivni besplatni dar uz svaku narudžbu koju izvršite. Spremni istražiti našu kolekciju i pronaći savršene darove? Pregledajte naš izbor vrhunskih artikala iz robnih kuća, izvršite narudžbu i radujte se uzbuđenju kada vaš besplatni dar stigne zajedno s vašom kupovinom.Pravila dostave
Trudit ćemo se dostaviti artikle nakon što primimo vaše narudžbe i osigurati da stignu sigurno. Detalji o dostavi bit će navedeni u vašoj potvrdnoj e-pošti.U većini slučajeva narudžbe se obrađuju u roku od 2 dana.U posebnim okolnostima, bit će odgođeno kako slijedi: Kada naručite subotom, nedjeljom ili praznicima, bit će odgođeno za 2 dana..Obično je potrebno 5-7 radnih dana (od ponedjeljka do petka) bez utjecaja kašnjenja leta ili drugih okolišnih čimbenika..Budući da je naša usluga dostave širom svijeta, vrijeme dostave ovisit će o vašoj lokaciji, pa možda trebate malo pričekati ako se nalazite u udaljenim područjima ili zemljama.1. Pravila povrata i zamjene
Prihvaćamo samo artikle kupljene s roymall.com. Ako kupujete od naših lokalnih distributera ili drugih trgovaca, ne možete ih vratiti na našoj strani. Artikli na kraju prodaje ili besplatni darovi nisu prihvatljivi za povrat.Da biste ispunili uvjete za povrat, vaš artikl mora biti neiskorišten i u istom stanju u kojem ste ga primili. Također mora biti u originalnom pakiranju.Nakon što od nas primite upute za povrat, pakirajte svoje vraćene artikle i ostavite paket u lokalnoj pošti ili drugom kuriru.Obradit ćemo vaš povrat ili zamjenu artikla unutar 3-5 radnih dana nakon što ga primimo. Povrat novca bit će obrađen i automatski vraćen na vaš izvorni način plaćanja.Ne mogu se prihvatiti povrati ili zamjene ako je proizvod prilagođen, uključujući prilagođenu veličinu, boju ili ispis.Treba li vam dodatna pomoć, kontaktirajte nas. service@roymall.com ili Whatsapp: +8619359849471
2.Pravila povrata novca
Dobit ćete potpuni povrat novca ili 100% kredita u trgovini nakon što primimo vraćeni paket i provjerimo ga. Povrat novca bit će obrađen i automatski vraćen na vaš izvorni način plaćanja.Imajte na umu da troškovi dostave i bilo kakve carine ili naknade nisu povratni. Dodatni troškovi dostave ne podliježu povratu nakon što je paket poslan. Odgovorni ste za plaćanje tih naknada i ne možemo ih odbiti ili vratiti, čak i ako se narudžba vrati nama. Nakon što primimo i potvrdimo vaš vraćeni artikl, poslat ćemo vam e-poštu kako bismo vas obavijestili da smo primili vaš vraćeni artikl. Također ćemo vas obavijestiti o odobrenju ili odbijanju vašeg povrata novca.Ako imate bilo kakvih problema u vezi s procesom povrata novca, kontaktirajte nas. service@roymall.com ili Whatsapp: +8619359849471
Description:
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown:
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use:
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis
Specification:
working currency: 140MHz~2700MHz
stepped frequency: 1kHz
Display: 2.4inch TFT
resolution: 320*240(QVGA)
battery: 2000mAH(7.4Wh)
power consumption: <1.5W
charge current: 400mA
charge port: USB
Auto power off can be set 5-60minutes
Measured parameters:
resistence reactance standing wave s11
resolution ratio: 4 number
frequency accuracy: about 5ppm
Connector: SMA-K
Measurement range:
impedance: 0.1~1000
standing wave: 1.000~65
s11(dB): 0dB~-60dB
Working temperature: 0~40 degree
Package included:
1 x Original N1201SA Antenna Analyzer Meter
1 x English User Manual
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown:
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use:
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis
Specification:
working currency: 140MHz~2700MHz
stepped frequency: 1kHz
Display: 2.4inch TFT
resolution: 320*240(QVGA)
battery: 2000mAH(7.4Wh)
power consumption: <1.5W
charge current: 400mA
charge port: USB
Auto power off can be set 5-60minutes
Measured parameters:
resistence reactance standing wave s11
resolution ratio: 4 number
frequency accuracy: about 5ppm
Connector: SMA-K
Measurement range:
impedance: 0.1~1000
standing wave: 1.000~65
s11(dB): 0dB~-60dB
Working temperature: 0~40 degree
Package included:
1 x Original N1201SA Antenna Analyzer Meter
1 x English User Manual
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Tools, Industrial & Scientific Ranking
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown:
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use:
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis
Specification:
working currency: 140MHz~2700MHz
stepped frequency: 1kHz
Display: 2.4inch TFT
resolution: 320*240(QVGA)
battery: 2000mAH(7.4Wh)
power consumption: <1.5W
charge current: 400mA
charge port: USB
Auto power off can be set 5-60minutes
Measured parameters:
resistence reactance standing wave s11
resolution ratio: 4 number
frequency accuracy: about 5ppm
Connector: SMA-K
Measurement range:
impedance: 0.1~1000
standing wave: 1.000~65
s11(dB): 0dB~-60dB
Working temperature: 0~40 degree
Package included:
1 x Original N1201SA Antenna Analyzer Meter
1 x English User Manual
